S=C PLUS „Set Constant”
This stands for wrapped V-Belts that can be used in a set
without measuring
Optibelt S=C PLUS - power transmission for perfectionists
Whether in automobiles, tool making machines or electrical
appliances,
there is one thing for sure:
The drive commands the performance! We have developed the
Optibelt S=C PLUS for special requirements, an extremely
durable
V-belt which meets the highest demands even under difficult
conditions.
Perfect, precise and reliable.
Example for S=C PLUS length tolerances for a high
performance wedge belt
with 5.000 mm datum length.
The dimension (A) is the tolerance permitted according to
DIN of an individual
V-belt with a length of 5.000 mm. If you want to assemble
sets for multi-groove
drives, the individual belt lengths may not show deviations
of more than 6 mm (B)
from each other.
The tolerance of the Optibelt S=C PLUS V-belt is
considerably lower than the
set tolerance permitted by the standard.
S=C PLUS V-belts are always close to the nominal length.
optibelt
KS V-grooved pulleys for
taper bushes
optibelt KS V-grooved pulleys for
cylindrical bore
optibelt RE Variable speed pulleys
optibelt
SK
High performance wedge belts
>> optibelt Red Power II
High performance wedge belts
optibelt VB
Classical V-Belts
optibelt KB
Kraftbands with high performance
wedge belts
>> optibelt KB Red Power II
Kraftbands with high performance
wedge belts
optibelt KB
Kraftbands with classical V-Belts
optibelt PKR
Endless V-Belts with special top surface
